Abstract

All-fiber interferometers employing magnetostrictive elements have successfully measured magnetic fields down to the 10−5-10−6-G level at various frequencies in the dc 10-Hz range.1,2 Typically, the transducing element in fiber magnetometers consists of single-mode fiber bonded to a metallic glass ribbon in either a planar or cylindrical configuration.3 A dither magnetic field hω cosω t is applied to the transducer. Due to the nonlinear magnetostrictive response of the metallic glass, the dither field mixes with the external low-frequency field to be measured, HΩ cosΩt (ω » Ω). Consequently, information on the HΩ field is contained in the phase signal sidebands ϕω±Ω and can be conveniently detected using lock-in amplification. We demonstrate a minimum detectable field level (HΩ)min of 0.2 × 10−6 G, rms/Hz at 10 Hz.

© 1987 Optical Society of America

PDF Article
More Like This
Remote Fiber Optic AC Magnetometer

A.R. Davis, S.S. Patrick, A. Dandridge, and F. Bucholtz
F43 Optical Fiber Sensors (OFS) 1992

Fiber-optic gradient-field magnetometer

K. P. Koo and George H. Sigel
TuB2 Optical Fiber Communication Conference (OFC) 1983

A NEW SAMPLING DETECTION SCHEME FOR HIGH SENSITIVITY FIBER OPTIC MAGNETOMETER

K. P. Koo, F. Bucholtz, and A. Dandridge
42 Optical Fiber Sensors (OFS) 1986

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription