Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
Conferences > LS > 2017 > JW4A > JW4A.70

Temperature Sensor Based on two twin biconical-taper fiber fabricated with Standard Fiber

E. A. Hernández-Robles, J. M. Sierra-Hernández, J.M. Estudillo-Ayala, R. Rojas-Laguna, D. Jauregui-Vazquez, Y. Lopez-Dieguez, J.A. Martin Vela, and J.C. Hernandez-Garcia

Not Accessible

Your library or personal account may give you access

Abstract

A temperature sensor based on a Mach-Zehnder interferometer is proposed. Developed using tapering optical fiber technique in a SMF-28 optical fiber. In the SMF-28 fiber the Mach- Zehnder interferometer is fabricated with two concatenated tapers, with a waist diameter of 25 ~ 40 µm and a length of 5mm to 10 mm, and a separation between the tapers about of 4~7 cm.

© 2017 Optical Society of America

PDF Article
More Like This
A biconical taper multi-mode fiber SERS sensor

Hua Bai, Zhenyi Chen, Na Chen, Qiang Guo, Kun Zhang, Fufei Pang, and Tingyun Wang
799004 Asia Communications and Photonics Conference and Exhibition (ACP) 2010

Surface-Enhanced Raman Scattering Sensor Based on Fused Biconical Taper Fiber

Lin Liu, Zhenyi Chen, Tingyun Wang, Fufei Pang, Na Chen, and Chenglin Li
TuG1 Asia Communications and Photonics Conference and Exhibition (ACP) 2009

In-Line All-Fiber Optics Digital Sensor Based on Biconic Taper of Depressed Cladding Fiber

Sergio Celaschi, Nicolas Grégoire, Younès Messaddeq, Claudecir R. Biazoli, and Gilliard N Malheiros-Silveira
JW5A.12 Frontiers in Optics (FiO) 2022

View More...
Select as filters
Select Topics Cancel
Top
       
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.
Privacy | Terms of Use