Abstract
Carbon fiber reinforced plastic (CFRP) composite has been expected to the next generation material. Laser CFRP processing has attracted attention. Fiber laser has recently appeared rapid development [1]. The fiber laser is superior to such as simplicity, stability of operation, large output and high beam quality under the hard environment compared to the conventional CO2 laser and YAG laser. Then, the CFRP processing with the fiber laser had been performed in this study. We had implemented the experimental study with the pulsed laser because of adoption of cutting by the ablation process and avoidance of the thermal cutting by the continuous wave laser [2]. The experimental study of CFRP processing with the fiber laser which was pulsed and high power was performed.
© 2014 Japan Society of Applied Physics, Optical Society of America
PDF ArticleMore Like This
M. Fujita, H. Ohkawa, M. Otsuka, T. Somekawa, Y. Maeda, T. Matsutani, N. Miyanaga, Y. Orii, K. Inaba, and G. Okada
19p_C4_6 JSAP-OSA Joint Symposia (JSAP) 2014
Hiroyuki Niino, Yoshizo Kawaguchi, Tadatake Sato, Aiko Narazaki, Ryozo Kurosaki, Mayu Muramatsu, Yoshihisa Harada, Koji Wakabayashi, Takahiro Nagashima, Zyunpei Kase, Masafumi Matsushita, Koichi Furukawa, and Michiteru Nishino
ThE3_5 Conference on Lasers and Electro-Optics/Pacific Rim (CLEO/PR) 2013
Yuji Sato, Masahiro Tsukamoto, Fumihiro Matsuoka, Kenjiro Takahashi, and Shinichiro Masuno
19p_C4_7 JSAP-OSA Joint Symposia (JSAP) 2014