Abstract

Printing of diffractive structures on 3D surfaces has been demonstrated using focal adjustment during i-line maskless lithography. A diffractive pupil for asymmetric astrometric distortion correction was fabricated on spherical mirrors with diameters up to 50mm.

© 2014 Optical Society of America

PDF Article
More Like This
Fabrication of an Off-Axis Astrometric Diffractive Pupil on a Convex Asphere Using Direct Write Laser Lithography

Lee Johnson, Eduardo Bendek, Olivier Guyon, Ridley Gatlin, and Tom Milster
JTh4B.3 Freeform Optics (Freeform) 2017

Maskless Lithography Tool for Fabrication and Inspection of Diffractive Optical Elements and Computer Generated Holograms

M. Zaverton, J. Sierchio, Y. S. Kim, D. Hansen, W. Bletcher, J. Tamkin, and T. D. Milster
OTuC5 Optical Fabrication and Testing (OFT) 2010

Maskless Lithography using Diffractive-Optical Arrays

Raiesh Menon, Michael Walsh, Mathias Galus, David Chao, Amil Patel, and Henry I. Smith
FWU5 Frontiers in Optics (FiO) 2005

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription