Abstract

The paper describes how the pedagogy of project based learning (PBL) was integrated into the Optical System Design course at School of Opto-electronics of Beijing Institute of Technology, Beijing, China. The course teaching philosophy, implementation methodologies, examples and experiences were discussed

© 2015 OSA, SPIE, IEEE Photonics Society

PDF Article
More Like This
Instructional Design of Problem-based teaching in Optical system Design Course using informatization teaching resources

Yifan Huang, Qun Hao, and Lin Li
11143_125 Education and Training in Optics and Photonics (ETOP) 2019

Cultivation of students’ engineering designing ability based on optoelectronic system course project

Danhua Cao, Yubin Wu, and Jingping Li
104522Y Education and Training in Optics and Photonics (ETOP) 2017

Let's go to the exhibition - Extracurricular practice in optoelectronic instrument design course

Yao Hu, Qun Hao, Yifan Huang, and Ya Zhou
IND08 Education and Training in Optics and Photonics (ETOP) 2015

References

  • View by:

  1. Robert M. Bunch et al., “Rethinking optical engineering capstone design experience”, Proc. SPIE, Vol. 7783, 2010.
    [Crossref]
  2. J. Burge and R. E. Parks, “Opto-mechanical engineering education at University of Arizona”, Proc. SPIE, Vol. 7424, 2009.
    [Crossref]
  3. J. F. Van Derlofske, "Computer modeling of LED light pipe systems for uniform display illumination," Proc. SPIE 4445, 119–129 (2001).
    [Crossref]

2010 (1)

Robert M. Bunch et al., “Rethinking optical engineering capstone design experience”, Proc. SPIE, Vol. 7783, 2010.
[Crossref]

2009 (1)

J. Burge and R. E. Parks, “Opto-mechanical engineering education at University of Arizona”, Proc. SPIE, Vol. 7424, 2009.
[Crossref]

2001 (1)

J. F. Van Derlofske, "Computer modeling of LED light pipe systems for uniform display illumination," Proc. SPIE 4445, 119–129 (2001).
[Crossref]

Bunch, Robert M.

Robert M. Bunch et al., “Rethinking optical engineering capstone design experience”, Proc. SPIE, Vol. 7783, 2010.
[Crossref]

Burge, J.

J. Burge and R. E. Parks, “Opto-mechanical engineering education at University of Arizona”, Proc. SPIE, Vol. 7424, 2009.
[Crossref]

Parks, R. E.

J. Burge and R. E. Parks, “Opto-mechanical engineering education at University of Arizona”, Proc. SPIE, Vol. 7424, 2009.
[Crossref]

Van Derlofske, J. F.

J. F. Van Derlofske, "Computer modeling of LED light pipe systems for uniform display illumination," Proc. SPIE 4445, 119–129 (2001).
[Crossref]

Proc. SPIE (3)

Robert M. Bunch et al., “Rethinking optical engineering capstone design experience”, Proc. SPIE, Vol. 7783, 2010.
[Crossref]

J. Burge and R. E. Parks, “Opto-mechanical engineering education at University of Arizona”, Proc. SPIE, Vol. 7424, 2009.
[Crossref]

J. F. Van Derlofske, "Computer modeling of LED light pipe systems for uniform display illumination," Proc. SPIE 4445, 119–129 (2001).
[Crossref]