Abstract

The fabrication of digital planar holograms by Step and Repeat UV nanoimprint lithography is reported. It opens a route for commercial development of new nanophotonic devices based on digital planar holography. Two first applications to be demonstrated are the high resolution spectrometer chips and the enhancement of brightness and power of laser diodes.

© 2011 Optical Society of America

PDF Article
More Like This
Soft UV-Nanoimprint lithography for the Fabrication of Frequency Selective Components

J. Viheriälä, J. Tommila, A. Laakso, S. Ranta, I. Vartiainen, H. Tuovinen, J. Telkkälä, T. Vallius, T. Niemi, M. Dumitrescu, and M. Pessa
CE7_4 The European Conference on Lasers and Electro-Optics (CLEO_Europe) 2009

Longitudinally Single Mode Laser-Diode Fabricated with Nanoimprint Lithography

Jukka Viheriälä, Juha Tommila, Tuomo Rytkönen, Lauri Toikkanen, Mihail Dumitrescu, Tapio Niemi, and Markus Pessa
CFY6 Conference on Lasers and Electro-Optics (CLEO) 2008

High-power 1550 nm tapered DBR lasers fabricated using soft UV-nanoimprint lithography

J. Viheriälä, J. Mäkelä, A. Aho, H. Virtanen, T. Leinonen, M. Dumitrescu, and M. Guina
CB_5_1 The European Conference on Lasers and Electro-Optics (CLEO_Europe) 2015

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription