Abstract

State of the art diode laser light sources for high power operation with good beam quality are distributed Bragg reflector tapered diode lasers (DBR-TPLs). These devices deliver over 10 W of spectrally narrowband emission within an almost diffraction-limited beam [1]. However, due to the integration of the tapered section into the resonator, these devices are designed that only a forward traveling wave is optimal confined and amplified. This trade-off limits the potential of these devices. One way to overcome this limitation is to move the tapered section outside of the resonator and use as a single pass power amplifier in a monolithic master oscillator power amplifier (MOPA) layout [2]–[4]. However, the benefits on the emissions characteristics, as discussed below, of these devices can diminish if multi-cavity operation occurs.

© 2019 IEEE