Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • 2013 Conference on Lasers and Electro-Optics - International Quantum Electronics Conference
  • (Optica Publishing Group, 2013),
  • paper CB_P_11

Increasing the luminance of a red emitting laser light source by spectral beam combining

Not Accessible

Your library or personal account may give you access

Abstract

Current diode laser based projections systems suffer from low output power and hence poor visibility, especially of the red laser sources. An additional constraint for flying-spot projection is that the light source should feature an almost diffraction limited beam and a low speckle contrast. This can be achieved with tapered lasers (TPL) [1], but the output power is limited to about 1 W. One possible way to further increase the luminance is spectral beam combining of multiple emitters.

© 2013 IEEE

PDF Article
More Like This
Semiconductor Coherent Beam Combining for Efficient, Wavelength-Selectable Laser Sources*

K. Creedon, S. Redmond, G. Smith, L. Missaggia, M. Connors, J. Kansky, G. Turner, A. Sanchez-Rubio, and T.Y. Fan
CTh5C.4 CLEO: Science and Innovations (CLEO:S&I) 2013

Spectral beam combining of diode lasers with high efficiency

André Müller, Deepak Vijayakumar, Ole Bjarlin Jensen, Karl-Heinz Hasler, Bernd Sumpf, Götz Erbert, Peter E. Andersen, and Paul Michael Petersen
AM4A.10 Advanced Solid-State Photonics (ASSL) 2012

Eyesafe Coherent Wind LIDAR Based On A Coherently-Beam-Combined Pulsed Laser Source

L. Lombard, M. Valla, C. Planchat, D. Goular, B. Augère, P. Bourdon, and G. Canat
CJ_8_1 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2013

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.