Abstract

The fabrication and performance of CeDFs using drawing tower and powder-in-tube technique are reported. The fluorescence spectrum of CeDFs exhibited a 160-nm near-Gaussian broadband emission with 41.4-dB SNR and 1.47-μm axial resolution, which was better than any other light sources to achieve axial resolution. These novel CeDFs may be functioned as a high-resolution source for use in fiber optical coherence tomography applications.

© 2015 Optical Society of America

PDF Article
More Like This
Fabrication of Ce-Doped Fibers by Using Rod-in-Tube Technique with Drawing Tower

Fang-Yen Lo, Chun-Nien Liu, Yi-Chung Huang, Wei-Lun Wang, Yen-Sheng Lin, Ta-Lung Chou, PiLing Huang, Sheng-Lung Huang, and Wood-Hi Cheng
WS3_2 OptoElectronics and Communications Conference and Photonics in Switching (OECC_PS) 2013

Fabrication and Characteristics of Cr-Doped Fibers Employing Powder-in-Tube Technique

Yi-Chung Huang, Jau-Sheng Wang, Kuei-Ming Chu, Ting-Chien Lin, Wei-Lun Wang, Ta-Lung Chou, Szu-Ming Yeh, Sheng-Lung Huang, and Wood-Hi Cheng
OWS1 Optical Fiber Communication Conference (OFC) 2011

Ultrahigh Resolution Optical Coherence Tomography via Ce3+:YAG Double-clad Crystal Fiber Source

Chien-Chung Tsai, Yen-Sheng Lin, Ting-Hao Chen, Yu-Ta Wang, Wei Chang, Po-Kai Hsu, Yung-Hsin Chang, Edmund Sun, and Sheng-Lung Huang
CThT3 Conference on Lasers and Electro-Optics (CLEO) 2010

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription