Add to BibSonomyAbstract
An efficient chirped-pulse regenerative amplifier at 1kHz repetition rate was researched with ring-cavity configuration, slope efficiency up to 40% and output energy-jitter less than 1.25% were demonstrated. Amplified pulse energy of 2.4mJ was obtained.
© 2007 IEEE
PDF ArticleMore Like This
Thin-Disk based Regenerative Chirped Pulse Amplifier with 550 mJ Pulse Energy at 1 kHz Repetition Rate
Yanik Pfaff, Michael Rampp, Clemens Herkommer, Robert Jung, Catherine Y. Teisset, Sandro Klingebiel, and Thomas Metzger
AM2A.5 Advanced Solid State Lasers (ASSL) 2021
Millijoule Picosecond Pulses at kHz repetition rates from a Ho:YLF Regenerative Amplifier Operating at 2.06 µm
Lorenz von Grafenstein, Martin Bock, Uwe Griebner, and Thomas Elsaesser
CF_1_2 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2015
Picosecond regenerative Yb:YAG thin disk amplifier at 200 kHz repetition rate and 62 W output power
Christian Stolzenburg and Adolf Giesen
MA6 Advanced Solid-State Photonics (ASSL) 2007