Abstract
In rib optical waveguides, scattering loss is strongly dependent on rib height and the degree of smoothness of the rib's side walls. A successful fabrication of rib waveguides requires an etchant that can give smooth side walls, has slow lateral etch rate, and can provide reproducible results. To our knowledge, the fabrication of waveguides with AIxGa1-xP/GaP material has not been investigated much or at all.
© 1994 Optical Society of America
PDF ArticleMore Like This
Wataru Sotoyama, Satoshi Tatsuura, and Tetsuzo Yoshimura
CWE1 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 1994
Swapan K. Baral, Ben joy Epen, and Anadi Mukherjee
CThI24 Conference on Lasers and Electro-Optics (CLEO:S&I) 1994
J. Söchtig, C. Appassito, J. Pedersen, B. Zysset, M. Ahlheim, M. Stähelin, and F. Lehr
CWG4 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 1994