Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Conference on Lasers and Electro-Optics
  • OSA Technical Digest (Optica Publishing Group, 1990),
  • paper CWB2

Excimer laser ablated CaF2 and MgF2

Not Accessible

Your library or personal account may give you access

Abstract

In the case of laser ablation of monolayers the final vapor phase etch products arise from a series of steps, i.e., absorption of the etch beam, alteration of the surface state, vaporization, and laser → plume excitations. While numerous works have dealt with each of these steps, only a minor fraction of them has dealt with the details of the chemical and physical alteration of the surface and, in particular alterations which allow large band gap insulators to absorb UV photons giving rise to vaporization.

© 1990 Optical Society of America

PDF Article
More Like This
Chemical aspects of the mechanism of excimer laser ablation of polymers

D. L. SINGLETON and G. PARASKEVOPOULOS
CWL2 Conference on Lasers and Electro-Optics (CLEO:S&I) 1990

Probing incubation pulses in excimer laser ablation of PMMA by fast (<1-ns) imaging and chemical analysis

KELLY G. CASEY, BODIL BRAREN, and R. SRINIVASAN
CWL5 Conference on Lasers and Electro-Optics (CLEO:S&I) 1990

XeCl excimer laser ablation of poly(ether sulfone)

HIROYUKI NIINO, MASASHI SHIMOYAMA, and AKIRA YABE
CWL4 Conference on Lasers and Electro-Optics (CLEO:S&I) 1990

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved