Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Conference on Lasers and Electro-Optics
  • OSA Technical Digest (Optica Publishing Group, 1990),
  • paper CFL6

High bandwidth operation of 1.3-μm GaInAsP surface emitting lasers

Not Accessible

Your library or personal account may give you access

Abstract

Much attention has recently been focused on the design and fabrication of surface emitting lasers (SELs)1–4 in an effort to reap the inherent advantages associated with these structures over edge emitting lasers. For practical applications, the frequency response of these devices is very important. Calculations are based on the general structure shown in Fig. 1, which is applicable to all GaAs or InP based SELs and in this case applied to a 1.3-μm GaInAsP SEL.

© 1990 Optical Society of America

PDF Article
More Like This
Low threshold current density operation of a 1.3-μm GaInAsP/InP transmission-type surface-emitting laser

S. Kubota, F. Koyama, and K. Iga
JThD5 Conference on Lasers and Electro-Optics (CLEO:S&I) 1992

Threshold Reduction of 1.3 μm GaInAsP/InP Surface Emitting Laser by a Maskless Circular Planar Buried Heterostructure Regrowth

T. Baba, K. Suzuki, Y. Yogo, K. Iga, and F. Koyama
QThA.2 Quantum Optoelectronics (QOE) 1993

Low Threshold Room Temperature Pulsed and −31 °C CW Operations of 1.3 µm GaInAsP/InP Buried Heterostructure Surface Emitting Lasers

T. Baba, Y. Yogo, K. Suzuki, F. Koyama, and K. Iga
PD28 Optical Fiber Communication Conference (OFC) 1993

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved