Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

High accuracy interrogation of a WDM FBG sensor array using radiation modes from a B-FBG

Not Accessible

Your library or personal account may give you access

Abstract

We report the development of a very low cost WDM optical sensor array interrogation system using the radiation modes from a blazed fibre Bragg grating. We present results indicating 70nm bandwidth, 2.1ρm RMS deviation from linear when decoding an FBG temperature sensor with only 0.2ρm RMS noise and a minimum WDM spacing of only 30ρm. We further show the system to be polarization independent.

© 2003 Optical Society of America

PDF Article
More Like This
Hybrid CDM-WDM Scheme for Interrogating 2×2000 Serial FBG Sensors

Marek Götten, Steffen Lochmann, Andreas Ahrens, Jan Van Roosbroeck, Johan Vlekken, Christian Vöigtlander, Eric Lindner, Bram Van Hoe, and César Benavente-Peces
T3.24 Optical Fiber Sensors (OFS) 2020

Low-cost in-fiber WDM devices using tilted FBGs

K. Zhou, G. Simpson, L. Zhang, and I. Bennion
CTuI3 Conference on Lasers and Electro-Optics (CLEO:S&I) 2003

Improvement of measurement accuracy of FBG sensor systems by use of gas absorption lines as multi-wavelength references

C.C. Chan, W. Jin, H.L. Ho, D.N. Wang, and Y. Wang
TuG4_3 Conference on Lasers and Electro-Optics/Pacific Rim (CLEO/PR) 2001

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved