Abstract

A simple technique to discriminate the Strain and Temperature with a single Fiber Bragg Grating (FBG) at cryogenic regime is presented in this paper. An uniform FBG is divided into two parts, one half is without coating (FBG1) and other half is coated with Cyno-Acrylic Adhesive (FBG2). The measured temperature and strain sensitivities of the FBG1 are 4.05×10-6/K and 2.13×10-6/µε and FBG2 are 1.39×10-5/K and 1.72×10-6/µε respectively.

© 2011 Optical Society of America

PDF Article
More Like This
An Improved Low Temperature Sensing Using PMMA Coated FBG

D. Sengupta, M. Sai Shankar, P. Saidi Reddy, R.L.N Sai Prasad, K. S. Narayana, and P. Kishore
831103 Asia Communications and Photonics Conference and Exhibition (ACP) 2011

A novel FBG sensing head geometry for strain-temperature discrimination

Wenjun Zhou, Chun-Liu Zhao, Jie Huang, and Xinyong Dong
WL104 Asia Communications and Photonics Conference and Exhibition (ACP) 2009

Brillouin Fibre Laser Sensor for Strain and Temperature Discrimination

O. Frazão, J. M. Marques, J. L. Santos, M. B. Marques, and J. M. Baptista
TuD5 Optical Fiber Sensors (OFS) 2006

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription