Abstract

We demonstrated and fabricated a 20μm-long ultra-compact variable optical attenuator based on thermo-optical effect with slow light photonic crystal waveguide (PCWG). In simulation, we optimize the line-defect width and radius/period ratio (r/a) of the PCWG for deep photonic band gap and large slope photonic band edge. An r/a=140nm/410nm W1 PCWG is selected for its -60dB depth and 36dB variable attenuation range when the tunable refractive index change is 0.01. We also study different shapes of micro-heaters for low power consumption and high heat transfer efficiency. A 24.6mW and 75.9% heat transfer efficiency are achieved in a 2μm-wide right-angle-shaped micro-heater. In experiment, A 4.6nm red shift at the cutoff wavelength of the fundamental mode and a 10dB tunable attenuation range are achieved through tuning the temperature of the W1 PCWG by an 4.7μm-wide aluminum micro-heater with a maximum power consumption as low as 30.7mW.

© 2011 Optical Society of America