Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Light transmission by subwavelength square coaxial aperture arrays in metallic films

Open Access Open Access

Abstract

Using the Fourier modal method, we study the enhanced transmission exhibited by arrays of square coaxial apertures in a metallic film. The calculated transmission spectrum is in good agreement with FDTD calculations. We show that the enhanced transmission can be explained when we consider a few guided modes of a coaxial waveguide.

©2003 Optical Society of America

Full Article  |  PDF Article
More Like This
Extraordinary transmission through a single coaxial aperture in a thin metal film

P. Banzer, J. Kindler (née Müller), S. Quabis, U. Peschel, and G. Leuchs
Opt. Express 18(10) 10896-10904 (2010)

Enhanced confined light transmission by single subwavelength apertures in metallic films

Fadi Issam Baida, Daniel Van Labeke, and Brahim Guizal
Appl. Opt. 42(34) 6811-6815 (2003)

Transmission enhancement through square coaxial aperture arrays in metallic film: when leaky modes filter infrared light for multispectral imaging

Benjamin Vial, Mireille Commandré, Guillaume Demésy, André Nicolet, Frédéric Zolla, Frédéric Bedu, Hervé Dallaporta, Stéphane Tisserand, and Laurent Roux
Opt. Lett. 39(16) 4723-4726 (2014)

Cited By

Optica participates in Crossref's Cited-By Linking service. Citing articles from Optica Publishing Group journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (9)

Fig. 1.
Fig. 1. Coaxial square aperture in a metallic film.
Fig. 2.
Fig. 2. Transmission of a square coaxial aperture calculated with the FDTD (blue curve) and the Fourier modal method (red curve).
Fig. 3.
Fig. 3. Dispersion curves of the first mode. Blue curve, real part; red curve, imaginary part. The presence of dips is probably due to the right angle corners.
Fig. 4.
Fig. 4. Dispersion curves of the second mode. Blue curve, real part; red curve, imaginary part.
Fig. 5.
Fig. 5. Modulus of the transverse electric field of the first guided mode.
Fig. 6.
Fig. 6. Modulus of the transverse electric field of the second guided mode.
Fig. 7.
Fig. 7. Twenty-first modal amplitude coefficients inside the coaxial on the upper face. The red bar corresponds to an attenuated guided wave.
Fig. 8.
Fig. 8. Twenty-first modal amplitude coefficients inside the coaxial on the lower face. The red bar corresponds to an attenuated guided wave.
Fig. 9.
Fig. 9. The ten first complex propagating constants associated to the ten first modes that are exited on the upper face inside the coaxial waveguide. The red one corresponds to an attenuated guide wave; its value is γ=1.39—0.006i.
Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.