Abstract
The properties of avalanche photodiodes and associated electronics required for photon counting in the Geiger and the sub-Geiger modes are reviewed. When the Geiger mode is used, there are significant improvements reported in overall photon detection efficiencies (approaching 70% at 633 nm), and a timing jitter (under 200 ps) is achieved with passive quenching at high overvoltages (20–30 V). The results obtained by using an active-mode fast quench circuit capable of switching overvoltages as high as 15 V (giving photon detection efficiencies in the 50% range) with a dead time of less than 50 ns are reported. Larger diodes (up to 1 mm in diameter) that are usable in the Geiger mode and that have quantum efficiencies over 80% in the 500–800-nm range are also reported.
© 1993 Optical Society of America
Full Article | PDF ArticleMore Like This
P. C. M. Owens, J. G. Rarity, P. R. Tapster, D. Knight, and P. D. Townsend
Appl. Opt. 33(30) 6895-6901 (1994)
S. Cova, M. Ghioni, A. Lacaita, C. Samori, and F. Zappa
Appl. Opt. 35(12) 1956-1976 (1996)
Robert G. W. Brown, Robin Jones, John G. Rarity, and Kevin D. Ridley
Appl. Opt. 26(12) 2383-2389 (1987)