Abstract

3D direct laser writing is a powerful and widely used tool to create complex micro-optics. The fabrication method offers two different writing modes. During the immersion mode, an immersion medium is applied between the objective and the substrate while the photoresist is exposed on its back side. Alternatively, when using the dip-in mode, the objective is in direct contact with the photoresist and the structure is fabricated on the objective facing side of the substrate. In this Letter, we demonstrate the combination of dip-in and photoresist immersion printing, by using the photoresist itself as immersion medium. This way, two parts of a doublet objective can be fabricated on the front and back sides of a substrate, using it as a spacer with a lateral registration below 1 µm and without the need of additional alignment. This approach also enables the alignment free combination of different photoresists on the back and front sides. We use this benefit by printing a black aperture on the back of the substrate, while the objective lens is printed on the front.

© 2022 Optica Publishing Group

Stress-induced birefringence in 3D direct laser written micro-optics

Michael Schmid and Harald Giessen
Opt. Lett. 47(22) 5789-5792 (2022)

Alignment-free integration of apertures and nontransparent hulls into 3D-printed micro-optics

Andrea Toulouse, Simon Thiele, Harald Giessen, and Alois M. Herkommer
Opt. Lett. 43(21) 5283-5286 (2018)

Generation of Bessel beams via femtosecond direct laser writing 3D phase plates

Jue Wang, Chengkun Cai, Kangrui Wang, and Jian Wang
Opt. Lett. 47(22) 5766-5769 (2022)

Three-dimensional direct laser written achromatic axicons and multi-component microlenses

Michael Schmid, Simon Thiele, Alois Herkommer, and Harald Giessen
Opt. Lett. 43(23) 5837-5840 (2018)

3D printed vascular phantoms for high-resolution biophotonic image quality assessment via direct laser writing

Hannah Horng, Kerry O’Brien, Andrew Lamont, Ryan D. Sochol, T. Joshua Pfefer, and Yu Chen
Opt. Lett. 46(8) 1987-1990 (2021)