Abstract

This paper describes a simple torch design for use with a microwave- induced plasma (MIP). The torch is constructed from commonly available components with an absolute minimum of machining. The basic torch may be constructed with the use of only hand tools and a drill press. The design is adaptable to a variety of configurations, including a tangential flow torch.

Characteristics of microwave plasma induced by lasers and sparks

Yuji Ikeda and Ryoji Tsuruoka
Appl. Opt. 51(7) B183-B191 (2012)

Laser Doppler velocimetry of particles in a plasma torch

L. Mannik and S. K. Brown
Appl. Opt. 25(5) 649-652 (1986)

Laser-induced breakdown spectroscopy enhanced by a micro torch

L. Liu, X. Huang, S. Li, Yao Lu, K. Chen, L. Jiang, J.F. Silvain, and Y.F. Lu
Opt. Express 23(11) 15047-15056 (2015)

Low Loss Fused Silica Made by the Plasma Torch

K. Nassau, T. C. Rich, and J. W. Shiever
Appl. Opt. 13(4) 744-745 (1974)

Microwave-enhanced laser-induced air plasma at atmospheric pressure

Yuji Ikeda and Joey Kim Soriano
Opt. Express 30(19) 33756-33766 (2022)