Add to BibSonomy
Abstract
Multilayer coated diffraction gratings are crucial components for extreme ultraviolet (EUV) applications such as spectroscopy or spectro-imaging. However, for high groove density, the smoothening of the grating surface profile with multilayer deposition remains a limitation that requires further investigation. In this paper, we report on the design, characterization, and modeling of 4000 lines/mm diffraction gratings coated with periodic and aperiodic Al/Mo/SiC multilayers for EUV radiation. Two types of gratings with different groove depths are compared. Multilayer coatings were designed using a genetic algorithm to maximize the first-order diffraction efficiency in the 17–21 and 19–23 nm wavelength ranges at normal incidence. Periodic and aperiodic multilayers with different numbers of layers were deposited by magnetron sputtering on the two types of fused silica gratings, and the grating groove profile evolution was measured by atomic force microscopy and cross-section transmission electron microscopy. The first-order diffraction efficiency was measured in the EUV at 5° incidence using monochromatic synchrotron radiation and modeled using the rigorous coupled-wave analysis method. The simulation models refined by using the Debye–Waller factor to account for the multilayer interfacial roughness show good agreement with experimental data. The results reported in this study will allow for designing efficient EUV multilayer gratings for high-resolution spectro-imaging instruments.
© 2023 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Amr Hisham K. Mahmoud, Sébastien de Rossi, Evgueni Meltchakov, Blandine Capitanio, Muriel Thomasset, Maxime Vallet, Eva Héripré, and Franck Delmotte
Opt. Express 30(21) 38319-38338 (2022)
David L. Windt and Jeffrey A. Bellotti
Appl. Opt. 48(26) 4932-4941 (2009)
Min-Hui Hu, Karine Le Guen, Jean-Michel André, Philippe Jonnard, Evgueni Meltchakov, Franck Delmotte, and Anouk Galtayries
Opt. Express 18(19) 20019-20028 (2010)