Abstract
We conducted the first pilot study to investigate the use of the attenuation coefficient from an optical coherence tomography (OCT) backscattered signal as a measure of surface roughness changes in eroded dentine at an early stage of the erosion process. Ten human premolar root samples were subjected to citric acid treatment before scanning by OCT. The extracted relative attenuation coefficient () from backscattered OCT signals was shown to increase with the duration of acid challenge. Validated against roughness measurements () from scanning electron microscopy scans, is significantly correlated with indicative of severity of erosion (, ). We conclude that the OCT attenuation coefficient of the immediate subsurface in eroded dentine is a potential surrogate measure for its surface roughness. However, further work should be performed to study how it relates to the surface and immediate subsurface changes effected by other mechanical wear before it could unequivocally be used as a surrogate measurement for surface roughness.
© 2018 Optical Society of America
Full Article | PDF ArticleMore Like This
Xiao-Jun Wang, Thomas E. Milner, Johannes F. de Boer, Yi Zhang, David H. Pashley, and J. Stuart Nelson
Appl. Opt. 38(10) 2092-2096 (1999)
Yueli Chen, Linda Otis, Daqing Piao, and Quing Zhu
Appl. Opt. 44(11) 2041-2048 (2005)
Abdirahman Aden, Paul Anderson, Gary R. Burnett, Richard J. M. Lynch, and Peter H. Tomlins
Biomed. Opt. Express 8(2) 954-973 (2017)