Abstract
In the context of our investigations on novel inertial reference sensors for space applications, we have explored a design utilizing an optical readout of a spherical proof mass. This concept enables full drag-free operations, hence reducing proof mass residual acceleration noise to a minimum. The main limitations of this sensor are errors in position determination of the center of mass of the proof mass due to the surface topography and the involved path length changes upon rotation. One solution is to apply a surface map for correction of the measurement data, thus improving the precision of position determination. This article presents the results of our one-dimensional interferometric surface topography measurements of a sphere, achieving uncertainties of , as a first step to realize a complete surface map. The measurement setup consists of two heterodyne interferometers positioned in an opposing configuration, which measure the surface topography while the sphere is continuously rotated by a rotation stage.
© 2016 Optical Society of America
Full Article | PDF ArticleMore Like This
Alexander Schultze, Alexander Sell, Dennis Weise, Harald Kögel, and Claus Braxmaier
Appl. Opt. 61(14) 4098-4105 (2022)
Harald Kögel, Domenico Gerardi, Joep Pijnenburg, Martin Gohlke, Thilo Schuldt, Ulrich Johann, Claus Braxmaier, and Dennis Weise
Appl. Opt. 52(15) 3516-3525 (2013)
Adam Hines, Logan Richardson, Hayden Wisniewski, and Felipe Guzman
Appl. Opt. 59(22) G167-G174 (2020)