Abstract

A new fabrication technique for the generation of optical aspherical surfaces of revolution is presented. This fabrication technique combines the characteristics of conventional loose abrasive machining with features of high-precision machining tools. A prototype of the machine tool based on this fabrication technique is currently being developed. We describe the characteristics of this method. Fabrication of aspherical ultraprecise surfaces using a tube is a line-contact method for the generation of both on- and off-axis, convex and concave, aspherical surfaces of revolution. It employs a self-correcting process and enables the use of loose-abrasive ductile grinding [Appl. Opt. 30, 2761–2777 (1991)] and subsequent bowl-feed polishing [Appl. Opt. 26, 696–703 (1987); Opt. Eng. 31, 1086–1092 (1992); Appl. Opt. 33, 89–95 (1994)] for the generation of aspherical surfaces.

© 1997 Optical Society of America

Loose-Abrasive Grinding of Optical Surfaces

W. Rupp
Appl. Opt. 11(12) 2797-2810 (1972)

Generation of on-axis and off-axis conic surfaces of revolution by applying a tubular tool

O. W. Fähnle, H. van Brug, C. J. van der Laan, and H. J. Frankena
Appl. Opt. 36(19) 4490-4496 (1997)

Loose abrasive lapping hardness of optical glasses and its interpretation

John C. Lambropoulos, Su Xu, and Tong Fang
Appl. Opt. 36(7) 1501-1516 (1997)

Determination of the Optimum Starting Surface for the Generation of Aspherical Surfaces of Revolution

O.W. Fähnle, H. van Brug, and H.J. Frankena
Appl. Opt. 36(34) 9112-9114 (1997)

Physics of loose abrasive microgrinding

Donald Golini and Stephen D. Jacobs
Appl. Opt. 30(19) 2761-2777 (1991)