Abstract
One of the major challenges faced by externally occulted solar coronagraphs is the suppression of the light diffracted by the occulter edge. It is a contribution to the stray light that overwhelms the coronal signal on the focal plane and must be reduced by modifying the geometrical shape of the occulter. There is a rich literature, mostly experimental, on the appropriate choice of the most suitable shape. The problem arises when huge coronagraphs, such as those in formation flight, shall be tested in a laboratory. A recent contribution [Opt. Lett. 41, 757 (2016) [CrossRef] ] provides the guidelines for scaling the geometry and replicate in the laboratory the flight diffraction pattern as produced by the whole solar disk and a flight occulter but leaves the conclusion on the occulter scale law somehow unjustified. This paper provides the numerical support for validating that conclusion and presents the first-ever simulation of the diffraction behind an occulter with an optimized shape along the optical axis with the solar disk as a source. This paper, together with Opt. Lett. 41, 757 (2016) [CrossRef] , aims at constituting a complete guide for scaling the coronagraphs’ geometry.
© 2017 Optical Society of America
Full Article | PDF ArticleMore Like This
Federico Landini, Marco Romoli, Cristian Baccani, Mauro Focardi, Maurizio Pancrazzi, Damien Galano, and Volker Kirschner
Opt. Lett. 41(4) 757-760 (2016)
Enrico Verroi, Fabio Frassetto, and Giampiero Naletto
J. Opt. Soc. Am. A 25(1) 182-189 (2008)
Federico Landini, Sébastien Vives, Mélanie Venet, Marco Romoli, Christophe Guillon, and Silvano Fineschi
Appl. Opt. 50(36) 6632-6644 (2011)