Abstract
A method of direct measurement of near-field phase and intensity distribution of laser diodes employing a single-mode fiber interferometer is proposed and demonstrated. The phase and intensity of the output beam of the laser in the vicinity of the output facet are measured directly via interferometry. Using a laser diode as an example, we obtained a beam width of 0.9 and at the output facet in the vertical and horizontal axes, respectively. In addition, the phase information of the output beam was also obtained by using interferometry. This technique is particularly useful for laser diodes whose near-field phases are difficult to measure directly. The measured vertical and horizontal wavefront radius of curvatures of a laser diode are in good agreement with the calculation from Gaussian beam theory. Detailed understanding and measurement of the near-field phase and intensity distributions of light sources and optical components are essential for micro-optic designs with better mode matching to minimize the insertion loss.
© 2010 Optical Society of America
Full Article | PDF ArticleMore Like This
C. Bellanger, B. Toulon, J. Primot, L. Lombard, J. Bourderionnet, and A. Brignon
Opt. Lett. 35(23) 3931-3933 (2010)
Bing Qi, Yue-Meng Chi, Hoi-Kwong Lo, and Li Qian
Opt. Lett. 35(3) 312-314 (2010)
Pengfei Sha, Jianguo Xin, Liping Fang, Zhengfan Liu, Ying Zhou, Hengli Zhang, Songlin Yu, and Jianguo Wen
Opt. Lett. 35(14) 2329-2330 (2010)