Abstract
A technique for interrogating multiplexed FBG sensors using all-fiber low-cost devices is demonstrated. It is based on spectral filtering employing a fused biconical wavelength-division multiplexer and on amplitude-to-phase optical conversion to perform power referencing. Four FBG sensors are wavelength multiplexed in the network, and a 3-nm-wide tunable optical filter is employed at the detection block for sensor demultiplexing. With this technique an operation range of more than 2 nm is demonstrated for the sensors with achievable wavelength static resolution ranging from 1.9 to 13.4 pm/Hz1/2 with no observable hysteresis. As for power referencing,the system is proven to be unaffected by power variations as high as 75% of the total power launched by the source. Finally, output-phase variations due to crosstalk are shown to be under 1% of the total output phase range, with more than 29-dB optical isolation between channels.
[IEEE ]
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription