Abstract
The ability of near-infrared (NIR) spectroscopy, combined with principal component regression (PCR), to nondestructively determine the blend ratio of high-density polyethylene (HDPE) and low-density polyethylene (LDPE) in extruded films is demonstrated. Results indicate that the NIR spectrum in the region 2100 to 2500 nm can be used to determine the HDPE mass percentage of 60-80-μm-thick film samples to within 2.5%, over a range of 0 to 100%. NIR spectral effects from scattering are important for the determination of the HDPE % for HDPE contents above 50%, and spectral effects from changes in the methyl group concentration and perhaps the PE crystallinity are important for the determination of the HDPE % for HDPE contents below 50%. In addition, a large variation between the spectra of replicate samples, probably caused by variations in the degree or direction of molecular orientation in the samples, was observed.
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription