Abstract
A 23-mm-i.d. torch is described and evaluated for use in inductively coupled plasma mass spectrometry. The plasma operates optimally at 1.50 kW forward power and 19.2 L/min total argon flow. The effect of the customary operating parameters (nebulizer flow rate, rf power, sampling deptn, and ion-iens voltages) on analyte signals is discussed. Detection limits, oxide-ion ratios, and doubly charged ion ratios have been measured and are compared with those produced by an 18-mm-i.d. low-flow MAK torch. When compared to the conventional torch, the 23-mm system exhibits comparable detection limits for low-mass ions but better detection limits for high-mass ions (Pb and U). Oxide-ion ratios are lower in the larger torch, but doubly charged ion ratios are higher. Because optimal sampling depths in the larger torch are higher, entrained air in the tail flame causes instability and results in increased ArO<sup>+</sup> and ArN<sup>+</sup> background signals.
PDF Article
More Like This
Multielemental analysis of prehistoric animal teeth by laser-induced breakdown spectroscopy and laser ablation inductively coupled plasma mass spectrometry
Michaela Galiová, Jozef Kaiser, Francisco J. Fortes, Karel Novotný, Radomír Malina, Lubomír Prokeš, Aleš Hrdlička, Tomáš Vaculovič, Miriam Nývltová Fišáková, Jiří Svoboda, Viktor Kanický, and Javier J. Laserna
Appl. Opt. 49(13) C191-C199 (2010)
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription