Abstract
This paper describes a new instrument system combining capillary-zone electrophoresis (CZE) separation and charge-coupled device (CCD) fluorescence detection. The performance of this CCD-CZE system is evaluated and compared with the performance of a photomultiplier tube (PMT) detector, with the use of signal-to-noise (S/N) ratio and acquisition time as measures of performance. The feasibility of on-column fluorescence spectrometric detection is demonstrated, and a three-dimensional electrophorogram is presented to show the spectral and time resolution obtained by injection of 2 femtomoles (5 nanoliters of 4.0 × 10<sup>−7</sup> M) of fluorescein into the capillary column. The software uses a "peak sum" method to achieve optimum S/N ration. The limit of optical detection (LOD) for this system is 4 attomoles (4 × 10<sup>-18</sup> mole) of fluorescein, with a CCD integration time of only 0.2 s. If the fluorescence signal were integrated for 4 s on the CCD, an LOD of less than 1 attomole could be achieved for fluorescein. A 4-s integration time would still permit three complete spectra during the 30-s elution time of the sample.
PDF Article
More Like This
Fluorescence monitoring of microchip capillary electrophoresis separation with monolithically integrated waveguides
Chaitanya Dongre, Ronald Dekker, Hugo J. W. M. Hoekstra, Markus Pollnau, Rebeca Martinez-Vazquez, Roberto Osellame, Giulio Cerullo, Roberta Ramponi, Rob van Weeghel, Geert A. J. Besselink, and Hans H. van den Vlekkert
Opt. Lett. 33(21) 2503-2505 (2008)
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription