Abstract
It is quite possible to detect the strain of a sample based on a chirped fiber grating (CFG) sensor, which has a wider bandwidth of light signal than a fiber Bragg grating. Usually, environmental factors play negative roles in the process of intensity demodulation. A drift-eliminating method of CFG intensity demodulation has been created and tested in our lab. Three CFG sensors were involved in this research. Two of them with close wavelength bands connected in series were used as a strain sensing unit; the third one was used as a referencing grating working within the reflective wavelength spectrum of the other two. It is shown that the signal ratio of the sensing unit and the referencing grating is a linear function of the loading strain. The linearity is as high as 99.79%.
© 2014 Optical Society of America
Full Article |
PDF Article
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription
Tables (1)
You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription
Equations (15)
You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription