Abstract
For a competitive sensor, both the sensitivity enhancement and calibration convenience are important. However, for surface-mounted fiber grating strain sensors, researchers in previous studies have seldom addressed these two capabilities simultaneously. Using the coupled-mode theory, we calculated the voltage signals from the filtered spectral-power interrogation system for a fiber Bragg grating with a glued grating or with a glue-free grating subject to different strain fields. Under a grating zone (the targeted surface), a one-dimensional linearly varied strain field, described by both the parameters of the average strain and the strain gradient, was considered. Finally, a simple and easy formula is provided (the improved-bonding linearly chirped fiber grating) to achieve both the sensitivity enhancement and calibration convenience at the same time for the strain sensor.
© 2010 Optical Society of America
Full Article | PDF ArticleMore Like This
Ruilei Zhang, Xi Wu, Li Hong, Jiheng Jin, and Guoxi Li
Appl. Opt. 61(35) 10567-10573 (2022)
Quan-bao Wang, Ye Qiu, Hai-tao Zhao, Ji-an Chen, Yue-ying Wang, and Zhen-min Fan
Appl. Opt. 51(18) 4129-4138 (2012)
Chih-Chun Cheng, Yu-lung Lo, and Wen-Yuan Li
Appl. Opt. 49(17) 3394-3402 (2010)