Abstract
The identification (ID) data reproduction was computationally examined for the compatibility with the aperture multiplexing and the telecentric system. The mask for the multiplexing caused shade in the reproduced ID data cell. The shading tolerance was improved by modulating the phase of the original image so that the ID data holograms diffract the light in the oblique direction or with the concentrating. The telecentric system reproduced all ID data cells in the same position of the image sensor and made a distinction among the cells impossible. This was solved by reproducing the cell point symmetrically from the corresponding ID data hologram in each ID data block.
© 2008 Optical Society of America
Full Article | PDF ArticleMore Like This
Tokinobu Mitasaki and Masakatsu Senda
J. Opt. Soc. Am. A 23(3) 659-663 (2006)
Tadayuki Imai, Takashi Kurihara, Shogo Yagi, Yoshiaki Kurokawa, Masahiro Endo, and Takaya Tanabe
Appl. Opt. 42(35) 7085-7092 (2003)
Elena Fernández, Manuel Ortuño, Sergi Gallego, Andrés Márquez, Celia García, Augusto Beléndez, and Inmaculada Pascual
Appl. Opt. 47(25) 4448-4456 (2008)