Abstract
A study of the major deposition parameters including source material, oxygen partial pressure, substrate temperature, and deposition rate affecting the optical quality of electron beam evaporated TiO2 films is presented. After careful optimization of these parameters it is possible to reproducibly deposit TiO2 films from TiO2 source material mixed with 5% CeO2 at an oxygen partial pressure of 5 × 10−5 Torr, a substrate temperature of 320°C, and a deposition rate of 2 Å/s.
© 1988 Optical Society of America
Full Article | PDF ArticleMore Like This
H. K. Pulker, G. Paesold, and E. Ritter
Appl. Opt. 15(12) 2986-2991 (1976)
Jyh-Shin Chen, Shiuh Chao, Jiann-Shiun Kao, Huan Niu, and Chih-Hsin Chen
Appl. Opt. 35(1) 90-96 (1996)
Yasumi Yamada, Haruo Uyama, Shigeyuki Watanabe, and Hisakazu Nozoye
Appl. Opt. 38(31) 6638-6641 (1999)