Abstract

Pulsed laser beam excitations are more commonly used in thermal lens spectroscopy (TLS) than continuous-wave (CW) ones, because CW excitations limit the measurement to linear absorption processes [J. Opt. A 5, 256 (2003)]. In this work, we present a new and full analytical model for a single-pulsed laser excitation dual-beam mode-mismatched TLS for low absorption solid-state and liquid samples. Our model has been based on a new solution of time-dependent heat equation for a finite-radius cylindrical sample exposed to a single-pulsed excitation laser beam. For low absorbent samples, unlike previous models, all aberration terms associated in the thermal lens were taken into account in Fresnel integration. Besides, the model provides a full analytical mathematical expression for the temperature rise, normalized signal intensity, and Z-scan photothermal lens signal. The model was confirmed with experimental data of distilled deionized water with excellent agreement. Therefore, the model allows us to extract thermo-optical properties of samples in an analytical and more accurate way.

© 2017 Optical Society of America

Probe-beam diffraction in a pulsed top-hat beam thermal lens with a mode-mismatched configuration

Bincheng Li and Eberhard Welsch
Appl. Opt. 38(24) 5241-5249 (1999)

Z-scan model for Laguerre–Gaussian excitation in mode-mismatched thermal lens spectrometry

Abdul Rahman, Joseph Niemela, and Humberto Cabrera
Appl. Opt. 62(31) 8286-8291 (2023)

Optimizing and calibrating a mode-mismatched thermal lens experiment for low absorption measurement

Arístides Marcano, Humberto Cabrera, Mayamaru Guerra, Renato A. Cruz, Carlos Jacinto, and Tomaz Catunda
J. Opt. Soc. Am. B 23(7) 1408-1413 (2006)

Pump–probe mode-mismatched thermal-lens Z scan

Aristides Marcano, Curtis Loper, and Noureddine Melikechi
J. Opt. Soc. Am. B 19(1) 119-124 (2002)

Femtosecond laser-induced thermal lens effect in chromium film

Linwei Zhu, Changhe Zhou, and Wei Jia
Appl. Opt. 49(33) 6512-6521 (2010)