Abstract
Long period grating was UV inscribed into a multicore fiber consisting of 120 single mode cores. The multicore fiber that hosts the grating was fusion spliced into a single mode fiber at both ends. The splice creates a taper transition between the two types of fiber that produces a nonadiabatic mode evolution; this results in the illumination of all the modes in the multicore fiber. The spectral characteristics of this fiber device as a function of curvature were investigated. The device yielded a significant spectral sensitivity as high as and to the ultra-low curvature values from 0 to . This fiber device can also distinguish the orientation of curvature experienced by the fiber as the long period grating attenuation bands producing either a blue or red wavelength shift. The finite element method (FEM) model was used to investigate the modal behavior in multicore fiber and to predict the phase-matching curves of the long period grating inscribed into multicore fiber.
© 2014 Optical Society of America
Full Article | PDF ArticleMore Like This
Joel Villatoro, Amy Van Newkirk, Enrique Antonio-Lopez, Joseba Zubia, Axel Schülzgen, and Rodrigo Amezcua-Correa
Opt. Lett. 41(4) 832-835 (2016)
O. Frazão, J. Viegas, P. Caldas, J. L. Santos, F. M. Araújo, L. A. Ferreira, and F. Farahi
Opt. Lett. 32(21) 3074-3076 (2007)
Byeong Ha Lee and Junji Nishii
Opt. Lett. 23(20) 1624-1626 (1998)