Abstract

We report on the investigation of thermal effects in high-repetition-rate pulsed optical parametric oscillators emitting in the mid-IR. We find that the thermal load induced by the nonresonant idler absorption plays a critical role in the emergence of thermally induced bistability. We then demonstrate a significant improvement of the conversion efficiency (more than 30%) when a proper axial temperature gradient is applied to the nonlinear crystal by use of a two-zone temperature-controlled oven.

© 2010 Optical Society of America

High-power, variable repetition rate, picosecond optical parametric oscillator pumped by an amplified gain-switched diode

Florian Kienle, Kang K. Chen, Shaif-ul Alam, Corin B. E. Gawith, Jacob I. Mackenzie, David C. Hanna, David J. Richardson, and David P. Shepherd
Opt. Express 18(8) 7602-7610 (2010)

High-repetition-rate ultrashort-pulse optical parametric oscillator continuously tunable from 2.8 to 6.8 µm

P. Loza-Alvarez, C. T. A. Brown, D. T. Reid, W. Sibbett, and M. Missey
Opt. Lett. 24(21) 1523-1525 (1999)

Efficient, high-repetition-rate, femtosecond optical parametric oscillator tunable in the red

A. Esteban-Martin, O. Kokabee, and M. Ebrahim-Zadeh
Opt. Lett. 33(22) 2650-2652 (2008)

Compact, high-pulse-energy, picosecond optical parametric oscillator

Florian Kienle, Peh Siong Teh, Shaif-Ul Alam, Corin B. E. Gawith, David C. Hanna, David J. Richardson, and David P. Shepherd
Opt. Lett. 35(21) 3580-3582 (2010)

High-repetition-rate femtosecond optical parametric oscillator based on RbTiOAsO₄

P. E. Powers, C. L. Tang, and L. K. Cheng
Opt. Lett. 19(18) 1439-1441 (1994)