Abstract
A two-loop-based low-coherence multiplexing fiber-optic sensor network is proposed and demonstrated. It greatly extends the multiplexing capacity of this kind of sensor. A practical implementation of this scheme uses a popular amplified spontaneous emission light source and standard single-mode fiber, which are commonly used in the communications industry. The sensor's two-loop topology is completely passive. Absolute length measurements can be obtained for each sensing fiber segment for use in measuring the quasi-distribution strain or temperature. For large-scale smart structures this technique not only extends the multiplexing potential but also provides a redundancy for the sensing system. This means that the two-loop sensor network can break down at several points and the sensing system will still work even if some of the embedded two-loop sensors have been destroyed. The robustness of the nine-sensor two-loop sensing network is investigated and discussed.
© 2005 Optical Society of America
Full Article | PDF ArticleMore Like This
Libo Yuan and Jun Yang
Opt. Lett. 30(9) 961-963 (2005)
Libo Yuan, Limin Zhou, Wei Jin, and Jun Yang
Opt. Lett. 27(11) 894-896 (2002)
Libo Yuan, Jun Yang, Limin Zhou, Wei Jin, and Xiaoli Ding
Appl. Opt. 43(16) 3211-3216 (2004)