Abstract

The efficiency of coupling an external radiation field into an integrated-optics waveguide mode using a distributed coupler such as a prism or a grating decreases with increasing power if one of the waveguide media is characterized by an intensity-dependent refractive index. The differences between the operating characteristics of such a nonlinear coupler and those of the familiar linear coupler are discussed. It is shown numerically that there exists an optimum detuning angle that varies with incident power for optimizing the coupling efficiency. This optimum efficiency, however, is still found to decrease with increasing power. Optimum values of incident-beam spot size and the ratio of spot size to characteristic linear coupling distance are also found to vary with guided-wave power. For coupling into lossy media, the coupling efficiency, which starts out much lower than for lossless media at low powers, becomes comparable with that for the lossless-media case at high powers. Ways of improving the coupling efficiency by using tapered films or chirped gratings are discussed, and calculations are given for specific cases.

© 1985 Optical Society of America

Analysis of grating couplers in planar waveguides for waves at oblique incidence

Marek T. Wlodarczyk and S. R. Seshadri
J. Opt. Soc. Am. A 2(2) 171-185 (1985)

Theory of pulsed excitation of nonlinear distributed prism couplers

G. Assanto, R. M. Fortenberry, C. T. Seaton, and G. I. Stegeman
J. Opt. Soc. Am. B 5(2) 432-442 (1988)

Saturation effects on the coupling efficiency of a nonlinear grating coupler

R. Moshrefzadeh
Appl. Opt. 29(9) 1365-1368 (1990)

Pulsed excitation of nonlinear distributed coupling into zinc oxide optical guides

R. M. Fortenberry, G. Assanto, R. Moshrefzadeh, C. T. Seaton, and G. I. Stegeman
J. Opt. Soc. Am. B 5(2) 425-431 (1988)

Nonlinear holographic waveguide coupler

B. J. Chang and S. K. Case
Appl. Opt. 15(7) 1800-1802 (1976)