Abstract
Fluorescence is one of the molecular spectroscopic properties that is enhanced by placing the molecule on the rough surface of a coinage metal. The surface-enhanced fluorescence (SEF) can be directly observed in steady-state fluorescence experiments. The observations are the results of a delicate balance between the enhanced emission and the quenching due to energy transfer to nonradiative surface plasmons. In the present report, SiO2-coated silver films were fabricated at varying dielectric thickness. The surface of the films was analyzed with the use of atomic force microscopy (AFM) and Xray photoelectron spectroscopy (XPS). AFM confirms the surface roughness and XPS analysis indicates that the SiO2 coverage was successful. SEF and SERS (surface-enhanced Raman scattering) were observed on active 6, 10, and 14 nm silver films coated with SiO2. Similar results were obtained with a 6 nm silver film coated with 6 nm SiO. The SEF work was carried out on fluorescent molecules with different quantum yield, and the typical enhancement factor obtained for the fluorescent signal was approximately 10. Both the SiO2 and SiO overlayers provide stable surfaces with welldefined hydrophilic properties. Such stable constructions have applicability towards the advancement of SERS and SEF as routine analytical techniques in bio- and chemical sensors.
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription