Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Continuous-wave laser damage and conditioning of particle contaminated optics

Not Accessible

Your library or personal account may give you access

Abstract

This paper describes the physical processes that occur when high-power continuous-wave laser light interacts with absorbing particles on a low-absorption optical surface. When a particulate-contaminated surface is illuminated by high-power continuous-wave laser light, a short burst of light is emitted from the surface, and the particles rapidly heat over a period of milliseconds to thousands of degrees Celsius, migrating over and evaporating from the surface. The surviving particles tend to coalesce into larger ones and leave a relatively flat residue on the surface. The total volume of the material on the surface has decreased dramatically. The optical surface itself heats substantially during illumination, but the surface temperature can decrease as the material is evaporated. Optical surfaces that survive this process without catastrophic damage are found to be more resistant to laser damage than surfaces that have not undergone the process. The surface temperature of the conditioned surfaces under illumination is lower than that of unconditioned surfaces. These conditioning effects on particles occurred within the first 30 s of laser exposure, with subsequent laser shots not affecting particle distributions. High-speed photography showed the actual removal and agglomeration of individual particles to occur within about 0.7 ms. Elemental changes were measured using time-of-flight secondary ion mass spectroscopy, with conditioned residuals being higher in hydrocarbon content than pristine particles. The tests in this study were conducted on high-reflectivity distributed Bragg reflector coated optics with carbon microparticles in the size range of 20–50 μm, gold particles of size 250 nm, and silica 1 μm in size.

© 2015 Optical Society of America

Full Article  |  PDF Article
More Like This
Rear-surface laser damage on 355-nm silica optics owing to Fresnel diffraction on front-surface contamination particles

François Y. Génin, Michael D. Feit, Mark R. Kozlowski, Alexander M. Rubenchik, Alberto Salleo, and James Yoshiyama
Appl. Opt. 39(21) 3654-3663 (2000)

Impact of laser-contaminant interaction on the performance of the protective capping layer of 1 ω high-reflection mirror coatings

S. R. Qiu, M. A. Norton, R. N. Raman, A. M. Rubenchik, C. D. Boley, A. Rigatti, P. B. Mirkarimi, C. J. Stolz, and M. J. Matthews
Appl. Opt. 54(29) 8607-8616 (2015)

Analysis of optical damage in germanium induced by a continuous wave laser

Kwang Hyun Lee, Wan Soon Shin, and Eung Cheol Kang
Appl. Opt. 52(10) 2055-2061 (2013)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (10)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved