Abstract
The chlorine concentration in concrete samples was measured by laser-induced breakdown spectroscopy (LIBS). One or two pulsed second harmonic Nd:YAG lasers () were used for the generation of laser-induced breakdown, and an intensified CCD camera, spectrometer, and optical bundle fiber were used for spectral measurement. To maximize the spectral intensity of the chlorine fluorescence line at a wavelength of , the time delay between laser irradiation and spectral measurement, the time delay between the two laser pulses in double-pulse measurement, and the gate width of the spectral measurement were optimized. The linear relationship between the spectral intensity of the chlorine fluorescence line and the chlorine concentration was verified for pressed samples with chlorine con centrations from 0.18 to . The signal-to-noise ratio was higher than 2 for the sample with a chlorine concentration of (). Thus, a chlorine concentration of , at which the reinforcing bars in concrete structures start to corrode, can be detected. These results show that LIBS is effective for the quantitative measurement of chlorine concentration in concrete with high sensitivity.
© 2010 Optical Society of America
Full Article | PDF ArticleMore Like This
Mohammed Ashraf Gondal, Mohamed Abdulkader Dastageer, Mohammed Maslehuddin, Abdul Jabar Alnehmi, and Omar Saeed Baghabra Al-Amoudi
Appl. Opt. 50(20) 3488-3496 (2011)
Alexander A. Bol'shakov, Jong H. Yoo, Chunyi Liu, John R. Plumer, and Richard E. Russo
Appl. Opt. 49(13) C132-C142 (2010)
Ahmed Asaad I. Khalil, Mohammed A. Gondal, Mohamed Shemis, and Irfan S. Khan
Appl. Opt. 54(8) 2123-2131 (2015)