Abstract

The analysis and design of a quasi-distributed multimode fiber refractometer array is presented. The main challenge in the design of a practical quasi-distributed sensor array proved to be in mitigation of otherwise pronounced cross-talk effects among the individual sensors in the network. The cross-talk effects originate from mode filtering properties and the strong mode excitation dependence on the multimode refractometer sensors that constitute the array. The introduction of mode conditioning based on fiber mode filters and mode mixers effectively reduced the cross talk to a negligible level while providing the desired sensor response at acceptable collateral losses to the network. A comprehensive experimental analysis was carried out to provide detailed insight into the multimode sensor array behavior and to obtain data necessary for an overall and effective network design.

© 2007 Optical Society of America

All-fiber, low-cost single-point and quasi-distributed evanescent field temperature sensors with extended temperature measurement range, based on standard telecommunication graded index fibers

Marko Kezmah and Denis Donlagic
Appl. Opt. 47(23) 4212-4220 (2008)

All-fiber multimode-interference-based refractometer sensor: proposal and design

Qian Wang and Gerald Farrell
Opt. Lett. 31(3) 317-319 (2006)

All-fiber quasi-distributed polarimetric temperature sensor

Denis Donlagic and Miran Lesic
Opt. Express 14(22) 10245-10254 (2006)

Cross-talk fiber-optic temperature sensor

G. Meltz, J. R. Dunphy, W. W. Morey, and E. Snitzer
Appl. Opt. 22(3) 464-477 (1983)

Use of wavefront encoding in optical interconnects and fiber switches for cross talk mitigation

Brian Robertson, Zichen Zhang, Maura M. Redmond, Neil Collings, Jinsong Liu, R. S. Lin, Anna M. Jeziorska-Chapman, John R. Moore, William A. Crossland, and D. P. Chu
Appl. Opt. 51(5) 659-668 (2012)