Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Corrosion characterization of durable silver coatings by electrochemical impedance spectroscopy and accelerated environmental testing

Not Accessible

Your library or personal account may give you access

Abstract

Highly reflective front-surface silver mirrors are needed for many optical applications. While various protective dielectric coating schemes have been developed, the long-term durability of Ag mirrors is still of great concern in the optics community for a variety of applications under harsh environments. The corrosion protection behavior of a SiNx-coated silver-mirror coating scheme was tested with electrochemical impedance spectroscopy (EIS) and accelerated environmental testing, including humidity and salt fog tests. The EIS data obtained were fitted with different equivalent circuit models. The results suggested that the 100Å thick SiNx coating produced by rf magnetron sputtering was porous and acted as a leaky capacitor on the Ag film, whereas the addition of a NiCrNx interlayer as thin as 3Å between SiNx and Ag films resulted in a much denser SiNx coating with a low-frequency impedance value of 2 orders of magnitude higher than that without the interlayer. Humidity and salt fog testing of different silver coatings showed similar results. The 100ÅSiNx/3ÅNiCrNx/Ag coating exhibited excellent corrosion resistance against the corrosive environments used in this study.

© 2006 Optical Society of America

Full Article  |  PDF Article
More Like This
Environmental durability of protected silver mirrors prepared by plasma beam sputtering

Kelsey A. Folgner, Chung-Tse Chu, Zachary R. Lingley, Hyun I. Kim, Jenn-Ming Yang, and James D. Barrie
Appl. Opt. 56(4) C75-C86 (2017)

Development and growth of corrosion features on protected silver mirrors during accelerated environmental exposure

Kelsey A. Folgner, Chung-Tse Chu, Scott D. Sitzman, Sean C. Stuart, Zachary R. Lingley, and James D. Barrie
Appl. Opt. 59(5) A187-A197 (2020)

Reflectance and durability of Ag mirrors coated with thin layers of Al2O3 plus reactively deposited silicon oxide

G. Hass, J. B. Heaney, H. Herzig, J. F. Osantowski, and J. J. Triolo
Appl. Opt. 14(11) 2639-2644 (1975)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (13)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (2)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (4)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved