Abstract

A novel optical-fiber displacement sensor is proposed and demonstrated. It consists of a laser diode light source, an optical-fiber probe, and two photodetectors. The bundling of the probe is sectioned into three parts: a centrally positioned fiber in the bundle for illumination, the first-neighbor fibers for receiving (part I), and the remaining fibers for receiving (part II). The ratio of the difference to the sum of the output signals from the part I and the part II receiving fibers can eliminate the variation in the sensitivity of the sensor to reflectivity of the target. The performance of the sensor is geometrically analyzed. The working distance is determined by the distance from the centered illuminating fiber to the boundary between the part I and the part II receiving fibers. The experimental measurements made with three different reflectivity targets confirm that the sensor performance is independent of the three reflectivities, as predicted by the analysis.

© 1999 Optical Society of America

Geometrical analysis of an optical fiber bundle displacement sensor

Atsushi Shimamoto and Kohichi Tanaka
Appl. Opt. 35(34) 6767-6774 (1996)

Development of a differential, optical, reflective displacement sensor by use of a multilayered waveguide

Fukuo Suganuma, Atsushi Shimamoto, and Kohichi Tanaka
Appl. Opt. 39(31) 5745-5749 (2000)

Simulation, implementation, and analysis of an optical fiber bundle distance sensor with single mode illumination

Haiying Huang and Uday Tata
Appl. Opt. 47(9) 1302-1309 (2008)

One-dimensional single-mode fiber-optic displacement sensors for submillimeter measurements

Vincent Trudel and Yves St-Amant
Appl. Opt. 48(26) 4851-4857 (2009)

One- and two-dimensional single-mode differential fiber-optic displacement sensor for submillimeter measurements

Vincent Trudel and Yves St-Amant
Appl. Opt. 47(8) 1082-1089 (2008)