Abstract

We built a large-area domain-engineered pyroelectric radiometer with high spatial and spectral response uniformity that is an excellent primary transfer standard for measurements in the near- and the mid-infrared wavelength regions. The domain engineering consisted of inverting the spontaneous polarization over a 10-mm-diameter area in the center of a uniformly poled, 15.5 mm × 15.5 mm square, 0.25-mm-thick LiNbO₃ plate. Gold black was used as the optical absorber on the detector surface, and an aperture was added to define the optically sensitive detector area. Our results indicate that we significantly reduced the acoustic sensitivity without loss of optical sensitivity. The detector noise equivalent power was not exceptionally low but was nearly constant for different acoustic backgrounds. In addition, the detector’s spatial-response uniformity variation was less than 0.1% across the 7.5-mm-diameter aperture, and reflectance measurements indicated that the gold-black coating was spectrally uniform within 2%, from 800 to 1800 nm. Other detailed evaluations of the detector include detector responsivity as a function of temperature, electrical frequency response, angular response, and field of view.

© 1999 Optical Society of America

Bicell pyroelectric optical detector made from a single LiNbO₃ domain-reversed electret

John H. Lehman and J. Andrew Aust
Appl. Opt. 37(19) 4210-4212 (1998)

Spectral power and irradiance responsivity calibration of InSb working-standard radiometers

George Eppeldauer and Miklós Rácz
Appl. Opt. 39(31) 5739-5744 (2000)

Calibration of a pyroelectric detector at 10.6 µm with the National Institute of Standards and Technology high-accuracy cryogenic radiometer

T. R. Gentile, J. M. Houston, G. Eppeldauer, A. L. Migdall, and C. L. Cromer
Appl. Opt. 36(16) 3614-3618 (1997)

Method for characterization of filter radiometers

Pasi Toivanen, Farshid Manoochehri, Petri Kärhä, Erkki Ikonen, and Antti Lassila
Appl. Opt. 38(9) 1709-1713 (1999)

Pyroelectric Trap Detector for Spectral Responsivity Measurements

J.H. Lehman
Appl. Opt. 36(34) 9117-9118 (1997)