Abstract

A free-space optical bus system is described for board-to-board interconnections at the backplane level. The system uses active optoelectronic modules as the interface between the circuit boards and the electrical backplane. Substrate-mode holograms are used to implement signal broadcast operations between boards, and each board on the backplane shares common free-space channels for transmitting and receiving signals. System-design considerations are given, and the potential performance of the optical bus system is evaluated. An experimental demonstration is also presented for the signal broadcast operation through cascaded substrate-mode holograms at a data rate of 622 Mb/s.

© 1996 Optical Society of America

Distributed optical data bus for board-level interconnects

Raymond K. Kostuk, Jang-Hun Yeh, and Mark Fink
Appl. Opt. 32(26) 5010-5021 (1993)

Free-space holographic optical interconnects for board-to-board and chip-to-chip interconnections

Jang-Hun Yeh and Raymond K. Kostuk
Opt. Lett. 21(16) 1274-1277 (1996)

Three-dimensional board-to-board free-space optical interconnects and their application to the prototype multiprocessor system: COSINE-III

Toshikazu Sakano, Takao Matsumoto, and Kazuhiro Noguchi
Appl. Opt. 34(11) 1815-1822 (1995)

Design and performance of a multiprocessor system employing board-to-board free-space optical interconnections: COSINE-1

Toshikazu Sakano, Takao Matsumoto, Kazuhiro Noguchi, and Tomoko Sawabe
Appl. Opt. 30(17) 2334-2343 (1991)

Tolerancing of board-level-free-space optical interconnects

David Zaleta, Susant Patra, Volkan Ozguz, Jian Ma, and Sing H. Lee
Appl. Opt. 35(8) 1317-1327 (1996)