Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Lidar measurements taken with a large-aperture liquid mirror. 1. Rayleigh-scatter system

Not Accessible

Your library or personal account may give you access

Abstract

A lidar system has been built to measure atmospheric-density fluctuations and the temperature in the upper stratosphere, the mesosphere, and the lower thermosphere, measurements that are important for an understanding of climate and weather phenomena. This lidar system, the Purple Crow Lidar, uses two transmitter beams to obtain atmospheric returns resulting from Rayleigh scattering and sodium-resonance fluorescence. The Rayleigh-scatter transmitter is a Nd:YAG laser that generates 600 mJ/pulse at the second-harmonic frequency, with a 20-Hz pulse-repetition rate. The sodium-resonance–fluorescence transmitter is a Nd:YAG-pumped ring dye laser with a sufficiently narrow bandwidth to measure the line shape of the sodium D 2 line. The receiver is a 2.65-m-diameter liquid-mercury mirror. A container holding the mercury is spun at 10 rpm to produce a parabolic surface of high quality and reflectivity. Test results are presented which demonstrate that the mirror behaves like a conventional glass mirror of the same size. With this mirror, the lidar system’s performance is within 10% of theoretical expectations. Furthermore, the liquid mirror has proved itself reliable over a wide range of environmental conditions. The use of such a large mirror presented several engineering challenges involving the passage of light through the system and detector linearity, both of which are critical for accurate retrieval of atmospheric temperatures. These issues and their associated uncertainties are documented in detail. It is shown that the Rayleigh-scatter lidar system can reliably and routinely measure atmospheric-density fluctuations and temperatures at high temporal and spatial resolutions.

© 1995 Optical Society of America

Full Article  |  PDF Article
More Like This
Lidar measurements taken with a large-aperture liquid mirror. 2. Sodium resonance-fluorescence system

P. S. Argall, O. N. Vassiliev, R. J. Sica, and M. M. Mwangi
Appl. Opt. 39(15) 2393-2400 (2000)

New technique for retrieval of atmospheric temperature profiles from Rayleigh-scatter lidar measurements using nonlinear inversion

Jaya Khanna, Justin Bandoro, R. J. Sica, and C. Thomas McElroy
Appl. Opt. 51(33) 7945-7952 (2012)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (11)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (2)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (3)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved