Abstract
A composite-cavity laser diode is used to monitor the reflectivity or the displacement of the external-cavity mirror for micromechanical photonics devices. Optical disk bits are read out in the near field from the difference in medium reflectivity with an antireflection-coated laser diode and a photodiode. Microbeam vibration is also detected in the near field from the phase difference with an uncoated laser diode and a photodiode. In both cases the carrier-to-noise ratio is very high (more than 45 dB) because of the lack of mode-hopping noise resulting from the extremely short (less than 3 μm) external-cavity length and strong light feedback. These composite-cavity laser diode microdevices are fabricated on a gallium arsenide substrate to eliminate the need for optical alignment.
© 1994 Optical Society of America
Full Article | PDF ArticleMore Like This
Haiyin Sun, Steve Menhart, and Alois Adams
Appl. Opt. 33(21) 4771-4775 (1994)
W. M. Wang, K. T. V. Grattan, W. J. O. Boyle, and A. W. Palmer
Appl. Opt. 33(10) 1795-1801 (1994)
Christian K. Laue, Ralf Knappe, Klaus-Jochen Boller, and Richard Wallenstein
Appl. Opt. 40(18) 3051-3059 (2001)