Abstract

This paper describes a new electrostatically driven micromechanical 2 × 2 optical switch which has advantages in terms of its small size and low driving power. Insertion losses, which are important to the fabrication of a low loss switch, are theoretically and experimentally evaluated. Based on the results, the relationship between cross angle and gap length is obtained in order to minimize insertion loss. The switch is demonstrated and its switching performance is examined. Insertion losses of less than 3.1 dB and crosstalk of less than −40 dB were obtained.

© 1991 Optical Society of America

Moving optical-fiber switch experiment

Hisao Yamamoto and Haruo Ogiwara
Appl. Opt. 17(22) 3675-3678 (1978)

Multichannel acousto-optic crossbar switch

Dan Owen Harris
Appl. Opt. 30(29) 4245-4256 (1991)

M × N electrically controlled optofluidic matrix switch

Mingrui Guo, Jing Wan, Wenzhi Yuan, Xu Zhu, Yijing Chen, and Shuo Wei
Appl. Opt. 60(31) 9981-9988 (2021)

Optical waveguide 2 × 2 matrix switch using dielectric chip motion

Hiroshi Terui, Morio Kobayashi, and Juichi Noda
Appl. Opt. 21(11) 1979-1984 (1982)

Magnetooptical 2×2 switch for single-mode fibers

Masataka Shirasaki, Fumio Wada, Hisashi Takamatsu, Hirochika Nakajima, and Kunihiko Asama
Appl. Opt. 23(19) 3271-3276 (1984)